Name: Shunt trip - for DRX - 48 V~/=
SKU: 027152

Shunt trip - for DRX - 48 V~/=

LEGRAND

Shunt trip - for DRX - 48 V~/=

REF. 027152 EAN. 3245060271527

Compare You can only compare 4 products, you must remove 1 to add this one

DRX 250 - thermal magnetic MCCBs from 125 to 250 A - For switching, control, isolation and protection of low - voltage electrical lines - Can be fitted with auxiliaries - Supplied with : - M8 terminals - Fixing screws - Insulating shields (2 for 3P and 3 for 4P) - Fixed thermal and magnetic - Conform to IEC 60947 - 2
Control and signalling auxiliaries for DRX 125 and 250 Shunt trips - 48 V~

Rated control supply voltage AC 50 Hz	48-48 V
Rated control supply voltage AC 60 Hz	48-48 V
Rated control supply voltage DC	48-48 V
Voltage type for actuating	AC/DC
Type of electric connection	Screw connection
Number of contacts as normally open contact	0

Number of contacts as normally closed contact	0
Number of contacts as change-over contact	0
Suitable for power circuit breaker	Yes
Suitable for off-load switch	Yes
Suitable for motor safety switch	Yes
Suitable for overload relay	Yes

1 document

Select all

Instruction Use

LE11967AB.pdf pdf (1 Mo)

5 documents

Select all

Catalogue Technical Page

ex223001_0141.pdf pdf (0.04 Mo)

Catalogue Technical Page

ex223001_0139.pdf pdf (0.05 Mo)

Catalogue Commercial Page

ex223001_0149.pdf pdf (0.11 Mo)

Catalogue Commercial Page

ex223001_0147.pdf pdf (0.11 Mo)

Catalogue Commercial Page

ex223001_0133.pdf pdf (0.16 Mo)

Shunt trip - for DRX - 48 V~/=